View MBA02040C1JRP00_8577835.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - professional www.vishay.com vishay beyschlag revision: 02-nov-15 1 document number: 28766 for technical questions, contact: filmresistorsleaded@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 professional thin film leaded resistors description mba/sma 0204, mbb/sma 0207, and mbe/sma 0414 professional leaded thin film resistors are the general purpose resistor for all fields of professional electronics where reliability and stability is of major concern. typical applications include industrial, telecommunication, automotive, and medical equipment. features ? cecc version (iecq-cecc approved according to en 140101-806) ? excellent overall stability: class 0.25 ? wide ohmic range: 0.22 to 22 m ? aec-q200 qualified available (1) ? radial version available for mbb/sma 0207 ? alternative termination wire s available for e.g. welding (mba/sma0204 only) ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 note (1) aec-q200 qualified parts are avai lable per tables temperature coefficient and resistance range. applications ? industrial ? telecommunication ? medical equipment ? automotive notes ? mb_ series has been merged with the related sma series to form one series mb_/sma__. (2) please refer to application information below. technical specifications description mba/sma 0204 mbb/sma 0207 mbe/sma 0414 din size 0204 0207 0414 cecc size a b d resistance range 0.22 to 10 m ; 0 0.22 to 22 m ; 0 0.22 to 22 m resistance tolerance 5 %; 1 %; 0.5 % temperature coefficient 50 ppm/k; 25 ppm/k rated dissipation, p 70 (2) 0.4 w 0.6 w 1.0 w operating voltage, u max. ac/dc 200 v 350 v 500 v operating temperature range (2) -55 c to 155 c peak permissible film temperature (2) 155 c 155 c 155 c insulation voltage: 1 min.; u ins 300 v 500 v 800 v continuous 75 v 75 v 75 v failure rate: fit observed 0.1 x 10 -9 /h 0.1 x 10 -9 /h 0.1 x 10 -9 /h
mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - professional www.vishay.com vishay beyschlag revision: 02-nov-15 2 document number: 28766 for technical questions, contact: filmresistorsleaded@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 application information the power dissipation on the re sistor generates a tempe rature rise against the local ambi ent, depending on the heat flow support of the printed-circuit bo ard (thermal resistance). the ra ted dissipation applies only if the permitted film temperature is not exceeded. furthermore, a high level of ambient temperature or of po wer dissipation may raise the temperature of the solder joint, hence special solder alloys or board materials may be required to maintain the reliability of the assembly. these resistors do not feature a limited lifetime when operated within the permissibl e limits. however, re sistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. the designer may estima te the performance of the particular resistor application or set certain load and temperature limits in order to maintain a desired stability. maximum resistance change at rated dissipation operation mode standard power climatic category -55 c / +125 c / 56 days -55 c / +155 c / 56 days rated dissipation, p 70 mba/sma 0204 0.25 w 0.4 w mbb/sma 0207 0.4 w 0.6 w mbe/sma 0414 0.65 w 1.0 w applied maximum film temperature, ? f max. 125 c 155 c max. resistance change at rated dissipation | r / r max.|, after: mba/sma 0204 1 to 475 k 1 to 475 k 1000 h 0.25 % 0.5 % 8000 h 0.5 % 1.0 % 225 000 h 1.5 % ? mbb/sma 0207 1 to 1 m 1 to 1 m 1000 h 0.25 % 0.5 % 8000 h 0.5 % 1.0 % 225 000 h 1.5 % ? mbe/sma 0414 1 to 2.4 m 1 to 2.4 m 1000 h 0.2 % 0.4 % 8000 h 0.4 % 0.8 % 225 000 h 1.2 % ?
mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - professional www.vishay.com vishay beyschlag revision: 02-nov-15 3 document number: 28766 for technical questions, contact: filmresistorsleaded@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? resistance ranges printed in bold are preferred tcr / tolerance combinations with optimized availability. (1) resistance value to be selected from e24 se ries for 5 %, 2 %, from e24/e96 series for 1 % to lerance and from e24/e192 for 0.5 % tolerance. (2) aec-q200 qualification applie s to products with tcr = 50 ppm/k and tolerance = 1 % in the ranges of 10 to 301 k for mba/sma 0204, 10 to 7.5 m for mbb/sma 0207, and 10 to 22 m for mbe/sma 0414. temperature coefficient and resistance range - standard products type tcr tolerance resistance (1)(2) e-series mba/sma 0204 50 ppm/k 5 % 0.22 to 0.91 e24 1 % 1 to 10 m e24; e96 0.5 % 10 to 475 k e24; e192 25 ppm/k 1 % 10 to 475 k e24; e96 0.5 % 10 to 475 k e24; e192 jumper - < 10 m ; i max. = 3 a - mbb/sma 0207 50 ppm/k 5 % 0.22 to 0.91 11 m to 22 m e24 1 % 1 to 10 m e24; e96 2 % 0.22 to 0.91 e24 0.5 % 10 to 1 m e24; e192 25 ppm/k 1 % 10 to 1 m e24; e96 0.5 % 10 to 1 m e24; e192 jumper - < 10 m ; i max. = 5 a - mbe/sma 0414 50 ppm/k 5 % 0.22 to 0.91 e24 1 % 1 to 22 m e24; e96 0.5 % 10 to 2.43 m e24; e192 25 ppm/k 1 % 10 to 2.43 m e24; e96 0.5 % 10 to 2.43 m e24; e192
mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - professional www.vishay.com vishay beyschlag revision: 02-nov-15 4 document number: 28766 for technical questions, contact: filmresistorsleaded@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? the products can be ordered using either the product description or the part number. ? standard products ar e not cecc approved. ? radial version (rb,ub) cannot be qualified according to ce cc so these can only be or dered as standa rd products. part number and product description - standard products part number: mbb02070c1001fct00 mbb02070c1001fct00 type/size variant tcr resistance tolerance packaging special mba0204 = mba/sma 0204 mbb0207 = mbb/sma 0207 mbe0414 = mbe/sma 0414 0 = neutral n = rb radial 5 mm for mbb/sma0207 s = ub radial 2.5 mm for mbb/sma0207 i = l0 welding joint not lacquered for mbb/sma 0207 b = kl lacquered welding joint for mba/sma 0204 d = ni wire for mba/sma 0204 d = 25 ppm/k c = 50 ppm/k z = jumper 3 digit value 1 digit multiplier multiplier 7 = *10 -3 8 = *10 -2 9 = *10 -1 0 = *10 0 1 = *10 1 2 = *10 2 3 = *10 3 4 = *10 4 5 = *10 5 6 = *10 6 0000 = jumper d = 0.5 % f = 1 % g = 2 % j = 5 % z = jumper ct c1 rp r2 r4 n4 00 = standard special termination wires for mba/sma 0204: fe = coppered steel ca = tinned cuag ns = tinned ni product description: mbb/sma 0207-50 1 % ct 1k0 mbb/sma 0207 - 50 1 % ct 1k0 type/size tcr tolerance variant packaging resistance mba/sma 0204 mbb/sma 0207 mbe/sma 0414 25 ppm/k 50 ppm/k 0.5 % 1.0 % 2.0 % 5.0 % rb ub l0 kl ct c1 rp r2 r4 n4 1k0 = 1 k 51r1 = 51.1
mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - professional www.vishay.com vishay beyschlag revision: 02-nov-15 5 document number: 28766 for technical questions, contact: filmresistorsleaded@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? resistance ranges printed in bold are preferred tcr / tolerance combinations with optimized availability. (1) resistance value to be selected from e24 series for 5 %, from e24/e96 series for 1 % tolerance and from e24/e192 for 0.5 % tolerance. (2) aec-q200 qualification applie s to products with tcr = 50 ppm/k and tolerance = 1 % in the ranges of 10 to 301 k for mba/sma 0204, 10 to 7.5 m for mbb/sma 0207, and 10 to 22 m for mbe/sma 0414. temperature coefficient and resistance range - cecc approved products type tcr tolerance resistance (1)(2) e-series mba/sma 0204 50 ppm/k 5 % 0.22 to 0.91 e24 1 % 1 to 10 m e24; e96 0.5 % 10 to 475 k e24; e192 25 ppm/k 1 % 10 to 475 k e24; e96 0.5 % 10 to 475 k e24; e192 jumper - < 10 m ; i max. = 3 a - mbb/sma 0207 50 ppm/k 5 % 0.22 to 0.91 11 m to 22 m e24 1 % 1 to 10 m e24; e96 0.5 % 10 to 1 m e24; e192 25 ppm/k 1 % 10 to 1 m e24; e96 0.5 % 10 to 1 m e24; e192 jumper - < 10 m ; i max. = 5 a - mbe/sma 0414 50 ppm/k 5 % 0.22 to 0.91 e24 1 % 1 to 22 m e24; e96 0.5 % 10 to 2.43 m e24; e192 25 ppm/k 1 % 10 to 2.43 m e24; e96 0.5 % 10 to 2.43 m e24; e192
mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - professional www.vishay.com vishay beyschlag revision: 02-nov-15 6 document number: 28766 for technical questions, contact: filmresistorsleaded@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? approval is accor ding to en 140101-806, version a. ? radial version (rb, ub) cannot be qualified according to ce cc so these can only be or dered as standa rd products. note (1) manufacturing at different production locations may involve use of different size box. part number and product description - cecc approved products part number: mbb0207vc1001fct00 mbb0207vc1001fct00 type/size variant tcr resistance tolerance packaging special mba0204 = mba/sma 0204 mbb0207 = mbb/sma 0207 mbe0414 = mbe/sma 0414 v = cecc 06 d = 25 ppm/k c = 50 ppm/k z = jumper 3 digit value 1 digit multiplier multiplier 7 = *10 -3 8 = *10 -2 9 = *10 -1 0 = *10 0 1 = *10 1 2 = *10 2 3 = *10 3 4 = *10 4 5 = *10 5 6 = *10 6 0000 = jumper d = 0.5 % f = 1 % j = 5 % z = jumper ct c1 rp r2 00 = standard l0 = welding joint not lacquered for mbb/sma 0207 kl = lacquered welding joint for mba/sma 0204 product description: mbb/sma 0 207-50 1 % cecc 06 ct 1k0 mbb/sma 0207 - 50 1 % cecc 06 ct 1k0 type/size tcr tolerance variant packaging resistance mba/sma 0204 mbb/sma 0207 mbe/sma 0414 25 ppm/k 50 ppm/k 0.5 % 1.0 % 5.0 % cecc 06 cecc 06 l0 cecc 06 kl ct c1 rp r2 1k0 = 1 k 51r1 = 51.1 packaging type / size code quantity packag ing style width pitch dimensions mba/sma 0204 c1 1000 taped acc. to iec 60286-1 fan-folded in a box 53 mm 5 mm 184 mm x 75 mm x 42 mm ct 5000 330 mm x 75 mm x 55 mm rp 5000 taped acc. to iec 60286-1 on a reel 53 mm 5 mm 242 mm x 76 mm x 86 mm mbb/sma 0207 (1) c1 1000 taped acc. to iec 60286-1 fan-folded in a box 53 mm 5 mm 184 mm x 74 mm x 42 mm 260 mm x 78 mm x 31 mm ct 5000 260 mm x 75 mm x 114 mm 324 mm x 77 mm x 82 mm rp 5000 taped acc.to iec 60286-1 on a reel 53 mm 5 mm 315 mm x 76 mm x 86 mm 298 mm x 75 mm x 86 mm mbb/sma 0207 ub = 2.5 mm pitch n4 4000 taped acc. to iec 60286-2 fan-folded in a box - 12.7 mm 330 mm x 262 mm x 45 mm r4 4000 taped acc. to iec 60286-2 on a reel 330 mm x 253 mm x 48 mm mbb/sma 0207 rb = 5 mm pitch n4 4000 taped acc. to iec 60286-2 fan-folded in a box - 12.7 mm 330 mm x 262 mm x 45 mm r4 4000 taped acc. to iec 60286-2 on a reel 330 mm x 253 mm x 48 mm mbe/sma 0414 c1 1000 taped acc. to iec 60286-1 fan-folded in a box 63 mm 5 mm 374 mm x 84 mm x 47 mm r2 2500 taped acc. to iec 60286-1 on a reel 315 mm x 80 mm x 90 mm
mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - professional www.vishay.com vishay beyschlag revision: 02-nov-15 7 document number: 28766 for technical questions, contact: filmresistorsleaded@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 description production is strictly controlled and follows an extensive set of instructions established for reproducibility. a homogeneous film of metal al loy is deposited on a high grade ceramic body and condit ioned to achieve the desired temperature coefficient. plated steel termination caps are firmly pressed on the metallized rods. a special laser is used to achieve the target value by smoothly cutting a helical groove in the resistive layer wi thout damaging the ceramics. connecting wires of electrolytic copper plated with 100 % pure tin are welded to the termination caps. alternative termination wires available for e.g. welding (mba/sma0204 only). the resistor elements are covered by a light blue protective coating designed for electrical, mechanical and climatic protection. four or five color code rings designate the resistance value and tolerance in accordance with iec 60062 . the result of the determined production is verified by an extensive testing procedure performed on 100 % of the individual resistors. only accepted products are stuck directly on the adhesive tapes in accordance with iec 60286-1 or for the radial versions in accordance to iec 60286-2 . materials vishay acknowledges the following systems for the regulation of hazardous substances: ? iec 62474, material declaration for products of and for the electrotechnical industry, with the list of declarable substances given therein (1) ? the global automotive declarable substance list (gadsl) (2) ? the reach regulation (1907/2006/ec) and the related list of substances with very high concern (svhc) (3) for its supply chain the products do not contain any of the banned substances as per iec 62474, gadsl, or the svhc list, see www.vishay.com/how/leadfree . hence the products fully comply with the following directives: ? 2000/53/ec end-of-life vehicle directive (elv) and annex ii (elv ii) ? 2011/65/eu restriction of the use of hazardous substances directive (rohs) with amendment 2015/863/eu ? 2012/19/eu waste electrical and electronic equipment directive (weee) vishay pursues the elimination of conflict minerals from its supply chain, see the conflict minerals policy at www.vishay.com/doc?49037 . assembly the resistors are suitable fo r processing on automatic insertion equipment and cutti ng and bending machines. excellent solderability is proven, even after extended storage. they are suitable for automatic soldering using wave or dipping. the resistors are completely lead (pb)-free, the pure tin plating provides compatibility with lead (pb)-free and lead-containing soldering proc esses. the immunity of the plating against tin whisker growth, in compliance with iec 60068-2-82, has been proven under extensive testing. the encapsulant is resistant to cleaning solvent specified in iec 60115-1 (3) . the suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. all products comply with gadsl (1) and the iec 62474 (2) list of legal restrictions on hazard ous substances. this includes full compliance with the following directives: ? 2000/53/ec end of vehicle life directive (elv) and annex ii (elvii) ? 2011/65/eu restriction of the use of hazardous substances directive (rohs) ? 2012/19/eu waste electrical and electrical equipment directive (weee) approvals the resistors (cecc version) are approved within the iecq-cecc quality assessmen t system for electronic components to the detail specification en 140101-806 which refers to en 60115-1 and en 140100 and the variety of environmental test procedures of the iec 60068 series. conformity is attested by the use of the cecc logo ( ) as the mark of conformity on the package label for the cecc version. vishay beyschlag has achieved approval of manufacturer in accordance with iec qc 001002-3, clause 2 . the release certificate for technology approval schedule in accordance with cecc 240001 based on iec qc 001002-3, clause 6 is granted for the vishay beyschlag manufa cturing process. related products for a correlated range of pre cision tcr and tolerance specifications see the datasheet: ? precision thin film leaded resistors, www.vishay.com/doc?28767 for products approved to en 140101-806, version e, with established reliability and failure rate level e7 (quality factor q = 0.1), see the datasheet: ? established reliability thin film leaded resistors, www.vishay.com/doc?28768 notes (1) global automotive declarable substance list, see www.gadsl.org (2) cefic (european chemical industry council) , eeca (european electronic component ma nufacturers as sociation), ei cta (european trade organisation representing the information and communications technology and consumer electronics), see www.digitaleurope.org/searchresults.aspx?search=eicta . all products comply with the iec 62474, material declaration for products of and for the electrotechnical industry. (3) other cleaning solvents with aggressive chemicals should be evaluated in actual cleaning process for their suitability.
mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - professional www.vishay.com vishay beyschlag revision: 02-nov-15 8 document number: 28766 for technical questions, contact: filmresistorsleaded@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 functional performance -55 ambient temperature in c power in % 0 50 70 100 125 155 180 derating 20 0 40 60 80 100 standard mode power mode 0 40 k 60 20 80 w load p temperature rise t r mbe/sma 0414 mba/sma 0204 mbb/sma 0207 rise of surface temperature temperature rise 0 0.1 0.2 0.3 0.4 0.5 1 0.9 0.8 0.7 0.6
mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - professional www.vishay.com vishay beyschlag revision: 02-nov-15 9 document number: 28766 for technical questions, contact: filmresistorsleaded@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 100 s 1 ms 10 ms 1 1 s 10 s 0.1 w s m 0 0 1 s 0 1 10 100 pulse duration t i pulse load p max. mbe/sma 0414 mba/sma 0204 mbb/sma 0207 maximum pulse load, single pulse; for permissible resistance change equivalent to 8000 h operation. single pulse 100 s 1 ms 10 ms 1 1 s 10 s 0.1 w s m 0 0 1 s 0 1 100 10 pulse duration t i continuous pulse load p max. mbe/sma 0414 mba/sma 0204 mbb/sma 0207 maximum pulse load, continuous pulses; for permissible resistance change equivalent to 8000 h operation. continuous pulse 100 v 1 kv 100 s 1 ms 10 ms 1 s 10 s s m 0 0 1 s 0 1 pulse duration t i pulse voltag e u max. mbe/sma 0414 mba/sma 0204 mbb/sma 0207 maximum pulse voltage, single and continuous pulses; for permissible resistance change equivalent to 8000 h operation. pulse voltage
mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - professional www.vishay.com vishay beyschlag revision: 02-nov-15 10 document number: 28766 for technical questions, contact: filmresistorsleaded@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 100 v 1 kv 10 v 10 kv 100 1 k 100 k 1 m 10 10 m resistance value r test voltage 10 k mbe/sma 0414 mba/sma 0204 mbb/sma 0207 pulse load rating in accordance with iec 60115-1, 4.27; 1.2 s/50 s; 5 pulses at 12 s intervals; for permi ss ible re s i s tance change (0.5 % r + 0.05 ) 1.2/50 pulse 100 v 1 kv 10 v 10 kv 100 1 k 100 k 1 m 10 10 m resistance value r test voltage 10 k mbe/sma 0414 mba/sma 0204 mbb/sma 0207 10/700 pulse pulse load rating in accordance with iec 60115-1, 4.27; 10 s/700 s; 10 pulses at 1 minute intervals; for permi ss ible re s i s tance change (0.5 % r + 0.05 ) 0.01 0.1 1 100 v/v mbe/sma 0414 mba/sma 0204 mbb/sma 0207 1k 10k 100k 1m 10m resistance value r current noise a 1 current noise - a 1 in accordance with iec 60195
mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - professional www.vishay.com vishay beyschlag revision: 02-nov-15 11 document number: 28766 for technical questions, contact: filmresistorsleaded@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 tests procedures and requirements all tests are carried out in accordance with the following specifications: ? en 60115-1, generic specification (includes tests) ? en 140100, sectional specification (includes schedule for qualification approval) ? en 140101-806 (successor of cecc 40101-806), detail specification (includes schedule for conformance inspection) the test and requirements table contains only the most important tests. for the full test schedule refer to the documents listed above. the tests are carried out in accordance with iec 60068-2-xx test method and under standa rd atmospheric conditions in accordance with iec 60068-1, 5.3. climatic category lct / uct / 56 (rated temperature range: lower category temperature, upper category temperature; damp heat, steady st ate, test duration : 56 days) is valid. unless otherwise specified th e following values apply: ? temperature: 15 c to 35 c ? relative humidity: 45 % to 75 % ? air pressure: 86 kpa to 106 kpa (860 mbar to 1060 mbar). for performing some of th e tests, the components are mounted on a test board in accordance with iec 60115-1, 4.31. in test procedures and requirements table, only the tests and requirements are listed with reference to the relevant clauses of iec 60115-1 and iec 60068-2-xx test methods. a short description of the te st procedure is also given. test procedures and requirements iec 60115-1 clause iec 60068-2 test method test procedure requirements permissible change ( r max.) stability for product types: stability class 0.5 stability class 1 stability class 2 mba/sma 0204 1 to 332 k 0.22 to < 1 > 332 k mbb/sma 0207 1 to 1 m 0.22 to < 1 > 1 m mbe/sma 0414 1 to 2.4 m 0.22 to < 1 > 2.4 m 4.5 - resistance - 5 % r ; 1 % r ; 0.5 % r 4.7 - voltage proof u rms = u ins ; 60 s no flashover or breakdown 4.8 - temperature coefficient at (20 / -55 / 20) c and (20 / 155 / 20) c 50 ppm/k; 25 ppm/k 4.13 - short time overload room temperature; u ?= 2.5?x or u = 2?x? u max. ; 5 s (0.1 %? r +?0.01 ) no visible damage (0.25 %? r +?0.05 ) no visible damage 0.5 %? r no visible damage 4.16 21 (ua 1 ) 21 (ub) 21 (uc) robustness of terminations tensile, bending, and torsion (0.1 %? r +?0.01 ) (0.25 %? r +?0.05 ) 0.5 %? r 4.17 20 (ta) solderability +235 c; 2 s; solder bath method; snpb40 good tinning (> 95 % covered, no visible damage) +245 c; 3 s; solder bath method; snag3cu0.5 4.18.2 20 (tb) resistance to soldering heat unmounted components; (260 5) c; (10 1) s (0.1 %? r +?0.01 ) no visible damage (0.25 %? r +?0.05 ) no visible damage 0.5 %? r no visible damage 4.19 14 (na) rapid change of temperature 30?min at -55 c 30?min at 155?c 5 cycles (0.1 %? r +?0.01 ) (0.25 %? r +?0.05 ) 0.5 %? r mba/sma 0204: 500 cycles mbb/sma 0207: 200 cycles mbe/sma 0414: 100 cycles (0.5 %? r +?0.05 ) (0.5 %? r +?0.05 ) (0.5 %? r +?0.05 ) 4.22 6 vibration 10 sweep cycles per direction; 10 hz to?2000 hz 1.5 mm or 200 m/s 2 (0.1 %? r +?0.01 ) (0.25 %? r +?0.05 ) 0.5 %? r 4.23 climatic sequence: 4.23.2 2 (ba) dry heat 155 c; 16?h 4.23.3 30 (db) damp heat, cyclic 55 c; 24?h; 90?% to?100?%?rh; 1 cycle 4.23.4 1 (aa) cold -55 c; 2?h 4.23.5 13 (m) low air pressure 8.5?kpa; 2?h; 15 c?to?35 c 4.23.6 30 (db) damp heat, cyclic 55?c; 5?days; 95 %?to?100?%?rh; 5 cycles (0.5 %? r +?0.05 ) no visible damage (1 %? r +?0.05 ) no visible damage 2 %? r no visible damage 4.23.7 dc load apply rated power for 1 min p 70 x r
mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - professional www.vishay.com vishay beyschlag revision: 02-nov-15 12 document number: 28766 for technical questions, contact: filmresistorsleaded@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) (0.4 % r + 0.05 ) for mbe/sma 0414 (2) (0.8 % r + 0.05 ) for mbe/sma 0414 (3) (0.2 % r + 0.05 ) for mbe/sma 0414 (4) (0.4 % r + 0.05 ) for mbe/sma 0414 4.24 78 (cab) damp heat, steady state (40 2) c; 56 days; (93 3) % rh (0.5 %? r +?0.05 ) (1 %? r +?0.05 ) 2 %? r 4.25.1 - endurance at 70 c: power operation mode u ?= or u = u max. ; 1.5 h on; 0.5 h off 70 c; 1000 h (0.5 %? r +?0.05 ) (1) 0.5 %? r 70 c; 8000 h (1 %? r +?0.05 ) (2) 1 %? r - endurance at 70 c: standard operation mode u ?= or u = u max. ; 1.5 h on; 0.5 h off 70 c; 1000 h (0.25 %? r +?0.05 ) (3) 0.25 %? r 70 c; 8000 h (0.5 %? r +?0.05 ) (4) 0.5 %? r 4.25.3 - endurance at 125 c and 155 c 125 c; 1000 h (0.25 %? r +?0.05 ) (0.5 %? r +?0.05 ) 1 %? r 155 c; 1000 h (0.5 %? r +?0.05 ) (1 %? r +?0.05 ) 2 %? r 4.29 45 (xa) component solvent resistance isopropyl alcohol (used in industrial application) +23 c; toothbrush method marking legible; no visible damage 4.40 - electrostatic discharge (human body model) iec 61340-3-1; 3 pos. + 3 neg. mba/sma 0204: 2 kv mbb/sma 0207: 4 kv mbe/sma 0414: 6 kv (0.5 %? r +?0.05 ) test procedures and requirements iec 60115-1 clause iec 60068-2 test method test procedure requirements permissible change ( r max.) stability for product types: stability class 0.5 stability class 1 stability class 2 mba/sma 0204 1 to 332 k 0.22 to < 1 > 332 k mbb/sma 0207 1 to 1 m 0.22 to < 1 > 1 m mbe/sma 0414 1 to 2.4 m 0.22 to < 1 > 2.4 m p 70 x r p 70 x r
mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - professional www.vishay.com vishay beyschlag revision: 02-nov-15 13 document number: 28766 for technical questions, contact: filmresistorsleaded@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions note (1) for 7.5 m < 10.0 mm, use version mbb/sma 0207 ... l0 (welding joint not lacquered) mbb/sma 0207 with radial taping lead spacing (ub = 2.5 mm), size 0207 lead spacing (rb = 5.0 mm), size 0207 dimensions - leaded resistor types, mass and relevant physical dimensions type d max. (mm) l max. (mm) d nom. (mm) l min. (mm) m min. (mm) mass (mg) mba/sma 0204 1.6 3.6 0.5 29.0 5.0 125 mbb/sma 0207 (1) 2.5 6.5 0.6 28.0 10.0 (1) 220 mbe/sma 0414 4.2 11.9 0.8 31.0 15.0 700 m i l d d l h c h 1 f p 3 max. insulated w direction of unreeling dimensions in millimeters pitch of components p 12.7 1.0 lead spacing f 2.5 + 0.6 / - 0.1 width of carrier tape w 18.0 + 1.0 / - 0.5 body to hole center h 18.0 2.0 height for cutting (max.) l 11 height for bending c 2.5 + 0 / - 0.5 height for insertion (max.) h 1 32 h 1 l h c p f h 0 w insulated 3 max. direction of unreeling dimensions in millimeters pitch of components p 12.7 1.0 lead spacing f 5.0 + 0.6 / - 0.1 width of carrier tape w 18.0 + 1.0 / - 0.5 body to hole center h 18.0 2.0 lead crimp to hole center h 0 16.0 0.5 height for cutting (max.) l 11 height for bending c 2.5 + 0 / - 0.5 height for insertion (max.) h 1 32
mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - professional www.vishay.com vishay beyschlag revision: 02-nov-15 14 document number: 28766 for technical questions, contact: filmresistorsleaded@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 historical 12nc information ? the resistors had a 12-digit numeric code starting with 2312 ? the subsequent 4 digits in dicated the resistor type, specification and packaging; see the 12nc table ? the remaining 4 digits indicated the resistance value: - the first 3 digits indicated the resistance value - the last digit indicated the resistance decade in accordance with resist ance decade table resistance decade historical 12nc example the 12nc code of a mba 0204 resistor, value 47.5 k and tcr 50 with 1 % tolerance, su pplied on bandolier in a box of 5000 units was: 2312 905 14753. resistance decade last digit 0.1 to 0.999 7 1 to 9.99 8 10 to 99.9 9 100 to 999 1 1 k to 9.99 k 2 10 k to 99.9 k 3 100 k to 999 k 4 1 m to 9.99 m 5 10 m to 99.9 m 6 historical 12nc - resistor type and packaging description 2312?...?..... ammopack reel type tcr tol. c1 1000 units ct 5000 units r1 1000 units r2 2500 units rp 5000 units mba 0204 50 ppm/k 5 % 900 3.... 905 3.... 700 3.... - 805 3.... 1 % 900 1.... 905 1.... 700 1.... - 805 1.... 0.5 % 900 5.... 905 5.... 700 5.... - 805 5.... 25 ppm/k 1 % 901 1.... 906 1.... 701 1.... - 806 1.... 0.5 % 901 5.... 906 5.... 701 5.... - 806 5.... jumper - 900 90001 905 90001 700 90001 - 805 90001 mbb 0207 50 ppm/k 5 % 910 3.... 915 3.... 710 3.... - 815 3.... 1 % 910 1.... 915 1.... 710 1.... - 815 1.... 0.5 % 910 5.... 915 5.... 710 5.... - 815 5.... 25 ppm/k 1 % 911 1.... 916 1.... 711 1.... - 816 1.... 0.5 % 911 5.... 916 5.... 711 5.... - 816 5.... jumper - 910 90001 915 90001 710 90001 - 815 90001 mbe 0414 50 ppm/k 5 % 920 3.... - - 825 3.... - 1 % 920 1.... - - 825 1.... - 0.5 % 920 5.... - - 825 5.... - 25 ppm/k 1 % 921 1.... - - 826 1.... - 0.5 % 921 5.... - - 826 5.... -
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.

▲Up To Search▲

Price & Availability of MBA02040C1JRP00

	To Download MBA02040C1JRP00 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .